9936 Express Drive Highland Indiana

Call Us Today For A Quote

A2D Lux Detailing & Coatings

The efficiency of a three-step Paint Correction procedure for fixing damaged vehicle paint has been investigated. These three methods allow quick and complete defect elimination without hologramming or machine-induced swirl marks. There are three different ways to polish paint using a machine, which is the focus of the three processes. Attention 2 Detail will help you learn more. 

Getting ready for a Paint Correction 

Before any alterations can be made, the paint must be thoroughly cleaned. Leaving behind impurities after polishing might lead to the formation of swirl marks. Use chemicals and a foam cannon to blast away any dirt or debris that may have accumulated on the paint. The car is dried with a high-end microfiber towel after being cleaned. The level of contamination determines the grade of clay bar used.

Preparation steps include using clay bars to clean the paint of any remaining contaminants. A touchless wash is used to rinse the automobile, and the car is dried again. The next step is to cover off any delicate areas, such as the emblems and trim. The paint job on the vehicle is finished and ready for a final inspection and fine-tuning.

Three stages of Paint Correction 

Step 1 – Correcting the most severe problems.

This is the first phase of Attention 2 Detail paint correction procedure. We’ll use either a rotary or a dual-action polisher, depending on the extent of the imperfections. Rotating machinery can smooth out even the deepest scratches and swirl patterns. A dual-action polisher may be used to eliminate mild defects. A foam or wool pad is commonly utilised with each machine. For this step, we usually use a heavy-duty cutting compound.

Step 2 – Refining the paintwork. 

This second procedure aims to improve the paint quality as much as feasible. The following step will be much simpler if this step is accomplished well. At this point, a dual action polisher, a medium cut pad, compound, and polish are often used.

3 stage Paint correction Attention2Detail

Step 3 – Finishing Polishing 

The last step in the paint correction procedure involves polishing the paint. After doing this, the paint will shine and sparkle like new. We start with one panel at a time and use a dual-action polisher in conjunction with a finishing foam pad with a nonabrasive polish. After giving the paint its final shine, we checked it to ensure no polishing residue had been left behind.

Why should you consider getting your paint corrected?

Affecting the paint’s life expectancy.

The paint will gradually deteriorate due to tiny scratches since they attract and collect water, oxidation, chemicals, dirt, and contaminants. There is a possibility of rusting and corrosion, which may be costly concerns to solve. Paint correction gets rid of these defects and also safeguards them.

Makes your car’s paint shine

Paint correction is used to fix the damages to the clear coat. Polishing the paint will bring back its glossy, wet appearance. Your automobile will have the appearance of being many years younger as a result of the newer, brighter, and more colorful paint.

Attention 2 Detail provides the best paint correction in Indiana.

Detailers at Attention 2 Detail have a wealth of knowledge, which allows them to guarantee that your paintwork will be polished to a level comparable to that of a showroom. This results in the most excellent possible paint correction. Our highly skilled crew will attend to all of your automobile detailing requirements! You can pay us a visit at 1940 North Lafayette Court, Griffith, Indiana 46319 alternatively, you can phone us at (219)533-9390 or email us at